Lights During Charging

One light flashing: Charging, but low battery

Two lights (one solid, one flashing): Charging, medium battery

Three lights on: Fully charged.

Lights During Vacuuming

All three lights solid on: High battery level

Two lights solid on: Medium battery level

One light solid on: Low battery level

One light on and flashing: ran out of battery, and the vacuum needs to be charged

Warning Lights 

1. One light (LED 3) is alternately flashing red and white, then turning off after 10 seconds.

Debris may be stuck or dustbox may be full, please check the following.

1. Check if any part is clogged by dirt or hair. 

2. Empty and clean the dustbox and filter. It's important to take out the white high-performance from the metal pre-filter to clean it.

2. One light (LED 3) is flashing red, then turning off after 10 seconds.

Motor fault, please confirm if the vacuum had sucked liquids or was used without filters. Please contact us for further help. 

3. One light (LED 3) is solid red, then turning off after 10 seconds. 

Battery fault, please try the following tips:

• Place the vacuum cleaner on the charging base.
• Install the battery correctly.
• Connect the power adapter to a power source.
• Contact us for help if the charging pins are not working normally.

If you need any further assistance, please contact us.